DF X- Series 3
The 2023 DFX - Series 3 Gasifier is designed for full time off grid battery charging and supplementing solar and wind technologies.
Designed to run a range of engines from 200cc up to 500cc; (Honda and Honda clone single cylinder engines and power generators) You can run larger applications by simply teaming additional modules.
The DFX-S3 comes standard on flat free wheels for easy mobility so the Ute is versatile to run a range of applications for fuel processing and other small engine powered applications.
The DFX-S3 in RTR format comes with the Fusion 1 module. This is a direct bolt on coarse filter with integrated start up blower. The Fusion 1 is network ready so you can network two additional DFX-S3 Stand Alone gasifiers easily; basically tripping your fuel capacity. Want to re fuel on the fly? Then you can set up the Fusion as a stand alone filter system basically converting all DFX-S3 Hybrid Gasifier's into stand alone modules. You then add shut off valve's for each machine and can then take each unit off line for re fueling without interrupting the generator while its running.
2023 DFX-S3 RTR
The DFX-Series Gasifier's are true multi fuel systems, they can run on a mixture range of 10% or less moisture content wood chips and engine grade charcoal with water injection. Charcoal is easy with our provided kiln kit. This simply intakes chunk fuels around 2 x 2 x (4-8 inch length) blocks or chunks and reduces this fuel to usable engine grade charcoal.
Lead times are out 4 to 6 weeks, only 50% of the unit cost is required to place an order. Inquire at the bottom of the page for more details.
DFX-Series 3 RTR (Ready To Run)
Price $3900.00
The DFX-S3 RTR is the ready to run version that comes with everything needed to run a 200cc to 500 cc single cylinder engines or power generators. This includes the Fusion 1 module with integrated start up blower and is network ready. Also included is the quick connect hose system, the saw dust ammo box fine filter, air / fuel mixture valve and engine adapters for most 200 cc and 500cc range Honda and Honda clone engines. You just supply fuel and the generator.
Model Specifications;
-
20 inches wide x 34 inches deep x 38 inches Tall
-
16/14 Ga Cold Rolled Steel Construction
-
Weight: 250 lbs
-
Full Capacity: 20 gallons
-
Hopper Load Capacity: 10 / 15 gallons
-
Water Injection System: Standard
-
Engine Displacement Size: 200cc to 500cc
-
Run Time: 1.5 hours 500cc eng. / 4 hours 200cc eng.
-
Power Output: Up to 3.5kW Continuous / 5 kW/hour Hopper
-
Fusion 1 Module: Yes
-
Network Ready: Yes
-
Filter System: Yes
-
Quick Connect Hose Kit: Yes
-
Start Up Blower: Yes
-
AFR Mixer Valve: Yes
-
Engine Adapter: Yes
-
Push Handle and Wheel Kit: Standard
DFX-Series 3 PNM (Plug in Networking Module)
Price $2550.00
The DFX-S3 in stand alone format is just the bare bones gasifier only. These units are intended to be used as networking modules to add onto existing RTR versions at lesser cost.
The end user could also create their own systems to make this unit complete, to save on cost. They would need source their own hose system, create a DIY filter, start up blower and engine adapter. We fully support this on our forum with tutorials already in existence or the user can create their own versions, we would be happy to help along the way.
Model Specifications;
-
20 inches wide x 34 inches deep x 38 inches Tall
-
16/14 Ga Cold Rolled Steel Construction
-
Weight: 150 lbs
-
Full Capacity: 20 gallons
- Hopper Load Capacity: 10 / 15 gallons
-
Water Injection System: Standard
-
Engine Displacement Size: 200cc to 500cc
-
Run Time charcoal: 1.5 hour 500cc eng. / 4 hours 200cc eng.
-
Power Output: Up to 3.5 kW Continuous / 5 kW/hour Hopper
-
Fusion 1 Module: No
-
Network Ready: No
-
Filter System: No
-
Quick Connect Hose Kit: No
-
Start Up Blower: No
-
AFR Mixer Valve: No
-
Engine Adapter: No
-
Push Handle and Wheel Kit: Standard