Ok guys we are wrapping up development on a number of products for 2024 and we will be launching the 2024 product line as these products become ready for market.
The current DFX Series will be discontinued and replaced with the CFX-Gasifier.
CFX = Charcoal Fuel Crossdraft
This gasifier will be a combination of the DFX-S2 and a S3. It will retain the width of the S-3 version and shortenned to the length of the S-2. This will improve usable fuel capacity while making this unit slightly less wieght and more compact. This will no longer be a series as this gasifier will span the typical range of 200 cc on upto 500cc power generators and it will still retain networking teaming capability so it can be scaled up.
For 2024 we have a brand new gasifier coming. The DXF-10 is ready for market and is available right now. The DXF features our all new excentric reactor system; it is the first of its kind. This gasifier is both a charcoal gasifier or it can be set up as a dedicated wood fueled gasifier. However for wood fuel set ups this will come as an optional kit. In standard format the DXF-10 will be offered in bare bones configuration as a charcoal only system. This will keep its base format at a lower price and we will standardize its shipping process. So even if you get the wood fuel kit, the gasifier will still be shipped in charcoal format. Besides simplifying our shipping preperations, we want our useres to run on charcoal first anyways. Running on charcoal is sort like having training wheels. Tar is not an issue with charcoal, the machine will run very stable. So the user can experience what to expect and engine performance with good and consistant fuel flows. Then you can learn to run on wood fuel. The gasifier in charcoal mode does not have a reactor core to restric fuel flows. The fuel just basically free falls through the machine. However when you set up for wood fuel, you will need to install our hearth reactor core into the machine. This is a critical component for running direct wood. There is a restriction here that brings heat generated from the oxidation process to a focal point. This is how the tar is cracked!! However this is a restriction point and it will cause inconsistant flows. So automation must be employeed to combat this. This will constist of hopper and grate agitators and Automatic Air/Fuel Mixer system. In addition there will be supplied all components to DIY external filters and move the start up blower remote. This is important as you dont want tarry/HOT gas flowing through your blower.
Additionally the VersiFire will be an add on package to the DXF-10 and later series. This will convert your DXF into an on demand gas supply system for the home. You can use this gas for radiant gas heating, gas water heaters, gas oven / cook range, evaportive refridgeration, gas clothes dryers etc. When combined with the DXF in standard charcoal fuel mode, you can run wood fuel when used for gas storage. We are working on adding the ability to run engines as well. There will be two ways. One is to have a CFX gasifier in addition, this gasifier can then run on the charcoal produced from the DXF/VersiFire system. The other option is get the wood fuel packege with the VersiFire. Then your system will produce engine grade gas supply to the home and for engine fuel for your generator. We are working on this and will be testing this part of the system here soon.
This will be our most versitile system we have ever created and quite possibly ever at this scale. This as far as I know has never been done before, this really is going to change game. If you are interested in any of the 2024 products please inquire via our contact page.