Brand new to accessorize any of the Charcoal gasifiers is a new DIY kiln kit. This is a kit you will put together to create a bulk charcoal fuel processor. You will need to source a 16 gallon barrel drum and steel 5 gallon pails. One to create your fire tube and then two others to be swapped out and used to catch the produced charcoal. You will need to cut holes to adapt our loading door, 4 inch chimney adapter and cut out the bottom of one of the steel buckets.
We can not market this as an indoor stove, it will be marketed as an outdoor charcoal kiln. So just FYI :)