Gasifier, wood gasifier, commercial gasifier for sale, gasifier for sale, biomass gasifier, biomass generator for sale,  wood gas forum, free gasifier plans, commercial wood gasification generator, best wood gasifier design, micro wood gasifier, small gasifier, fema gasifier 

Base Model Features: ​​​​

  • Runs on standard 1/4 Inch - 7mm wood pellets

  • Small and Compact but Powerful in a small foot print (42" X 42 and a machine height of just 56" tall)

  • 1.3 kgs/kW consumption rate with 0.5 kgs/kW Combined CHP

  • 200 lbs Fuel Capacity

  • 24 HP V Twin / Liquid Cooled Engine 

  • 8 kW Power Output (2800 RPM)

  • 40,000 BTU CHP (Standard)

  • Fully automated hands free operation 

  • Auto run capability when inverter technology is employed (This will more than double the machines run times per hopper load)

  • Tar detection sensor (standard all machines) This ensures harmful tars never make it into your engine.  

  • One to two week, low maintenance filtration system. (Running full time)

  • 24 Hour char ash clean out intervals

  • Optional (Schneider Electric Conext XW Inverter 120/240 -110/230 volt 50/60 hz units available) (Required for Autorun Feature)

  • Machine Networking Capability up to 72 kW and beyond (Inverter option only)

Flex Power Station CHP  (8 kW)

The Flex Power Station CHP is a ready to run biomass to heat and power generation system for full time off grid applications. The machine features the Liquid Cooled 24 hp V twin engine. The exhaust heat reclaim unit is standard on this machine and is combined with the liquid cooling system of the engine. This combined heat reclaim system allows for much higher efficiency gains. Fuel consumption rate can be as low as 0.5 kgs / kW (Combined Heat and Power Output)


The bulk feed auger system extends re fueling intervals out days at a time. The machine is fully automated with a touch screen interface featuring the Thrive OS operating software. This makes this machine user friendly and easy to operate, so that anyone can operate it. Additionally automatic run capability sets this unit apart from many of our competitors. When battery storage and charger mode is activated; the machine can run automatically, self starting to charge the battery bank and then shut down automatically when full. This dramatically cuts down on fuel consumption rates, as it never sits just idling with out load. The machine runs on the 1/4 inch / 7mm wood pellet, tar prevention sensor is also standard with the adapter kit. 


Base Price $19,550.00 USD plus Shipping

Additional Options:​​​​

Schneider Electric Conext XW Inverter (Add $3500.00)

The Schneider Electric Conext XW inverter is a 140 amp battery charger and 7 to 8 kW inverter wrapped up in one. It brings balance to our 8 kW Flex Power System and allows the automatic run capability of the machine. Make only the power you need and demand. This makes for a much more efficient use of your fuels. The Schneider is also supports charging many battery types on the market. This inverter also is grid tie ready and can be stacked, so teaming more of our systems together into one is possible. 

  • 7 to 8 kW capable (depending on 50 or 60 hz model)

  • Single  and Three Phase Compatible 

  • 230 / 240 volt 50 / 60 Hz Options Available

  • 140 Amp On Board Battery Charger

  • Grid Tie Ready

  • Scalable 

Main Corporate Office

13980 155th Ave

Grand Haven Mi 49417

  • Facebook Social Icon
  • YouTube Social  Icon

© 2019 Thrive Energy Systems